Call Us  843.346.4427  |  E-Mail Us

Struthers-Dunn - Leaders in Relays & Controls Since 1923
Manufacturer of High Quality Relays & Controls
Relays & Controls
  GO
Relay Products Distributor InventoryGeneral PurposeTraffic Relays Power Relays & Contactors Motor Reversing Latching/Sequencing Special Purpose & Custom
Design
Sensitive - Low Input Power Timer/Sensor Reed Accessories and Sockets
 
CAD (0)
  • Cart is empty

The 250 Series relay was designed as a replacement for the GE relays used widely in Control units for Gas Turbine power plants.  They have the unique GE 14 pin plug design and also have LED and Neon indicator lamps with test push buttons for manual checking of operation.  There are additional variations of this relay available as well.  Contact us for additional information.

Unit of Measure

Coil

Coil Voltage

N/A 115VAC

Duty

N/A Continuous

Pickup Voltage Range

N/A 80% of nominal or less DC, 85% of nominal or less AC

Nominal Coil Power

N/A 2 / 2.75 VA(DC) 1.2 W

Contacts

Contact Arrangement

N/A 3PDT

Contact Material

N/A Silver Cadmium Oxide, Gold Flashed

Contact Rating 120 / 240VAC Resistive

N/A 10 A / 6 A

Contact Rating 28VDC Resistive

N/A 10 A

Contact Resistance, Initial

N/A 0.050 Ohms Max.

Dielectric Strength

Across Open Contacts

N/A 1000 Vrms

Between Mutually Insulated Point

N/A 1500 Vrms

Insulation Resistance

N/A 1,000 megohms min at 500VDC

Timing

Operate Time (max)

N/A 25 ms

Release Time (max)

N/A 20 ms

Temperature

Operating Temperature Range

N/A (AC): -10 ºC to +50 ºC, (DC): -10 ºC to +60 ºC

Storage Temperature Range

N/A -30 ºC to +105 ºC

Miscellaneous

Enclosure

N/A Octal Polycarbonate Dust Cover

Weight

N/A Open - 2.5 oz, Closed - 3.5 ozOpen - 70.9 g, Closed - 99.2 g