Call Us  843.346.4427  |  E-Mail Us

Struthers-Dunn - Leaders in Relays & Controls Since 1923
Manufacturer of High Quality Relays & Controls
Relays & Controls
  GO
Relay Products Distributor InventoryGeneral PurposeTraffic Relays Power Relays & Contactors Motor Reversing Latching/Sequencing Special Purpose & Custom
Design
Sensitive - Low Input Power Timer/Sensor Reed Accessories and Sockets
 

  • 85 Series - Screw Terminal Sequence Relays

    The 85 series relay is a panel mounted, screw terminal, open style sequencing relay. This two pole relay has a single coil which operates a ratchet wheel. Control cams, on the ratchet wheel shaft, step from one position to the next on each impulse to the coil. A 50 millisecond pluse will step the relay. Coils are for momentary duty only. The 85 series may be supplied in any sequence up to 12 steps. Contacts are single throw.

    Additional contact configurations and coil options are available – please use the RFQ/RFI tab above to submit your request.

    Made in U.S.A.

  • 255 Series - Industrial Latching Relays

    The 255 Series is a two coil latching version of the general purpose type 219 relay. When the operate coil is momentarily energized, contacts transfer and remain so even after coil power is removed. The second coil when momentarly energized, provides electrical reset of the contacts. All contacts operate from a common armature to prevent contatct overlapping. Coils are rated for continous duty. Both coils can be energized at the same time with no damage. The operate coil is dominant.

    Additional contact configurations and coil options are available – please use the RFQ/RFI tab above to submit your request.
    UL Recognized, UL Listed, & CSA               Made in U.S.A. Models Available

  • 311 Series - Industrial Sequencing Relays

    The 311 Series relays are sequencing (stepper) relays built on the industrial 219 style frame. Hold down clip is integral to the relay base. Double pole contacts transfer on energizing of coil or de-energizing. Dual cam movement allows contacts to operate together or separately. Works equally well with application of continous voltage to coil or energy saving impulse. No continuous voltage required for memory. Numerous custom switching arrangements are possible over 8 steps per revolution of the cams.

    Additional contact configurations and coil options are available – please use the RFQ/RFI tab above to submit your request.
    UL Recognized             RoHS Compliant            Made in U.S.A. Models Available